Box For Text Stamps. This box is for my text stamps (see other listing). https://makerworld.com/en/models/2875099-curlz-mt-text-stamps-20mm-text#profileId-3210303 I have added little feet to each box (need glued) this also helps when stacking them together.

Curlz MT Text Stamps 20mm Text These were created using Bambu Studio. I have shown 2 examples of finished work. See my other listings for the box and the clay thickness sticks.

Dewalt Airlock to Dewalt Jigsaw DCS331 Adapter This adapter allows the Dewalt Airlock vacuum to connect to the jigsaw. This is a TIGHT friction fit. I did not add the little clip to the top as on the original adapter (see the picture with the original & my one). The supports are easily removable but the inside one might need a little prod with something to remove it.

This is my replacement Dewalt Jigsaw DCS331 Zero Clearance Body Insert. As you can see, this fits to the metal body of the jigsaw. The clear insert in the pictures is the Dewalt original plate. If you want an insert that fits the black plastic foot cover, see the following: https://makerworld.com/en/models/2841980-dewalt-jigsaw-dcs331-zero-clearance-plate-insert?from=search#profileId-3168488

Dewalt Jigsaw DCS331 Zero Clearance Plate Insert This is my Zero Clearance plate for my Dewalt Jigsaw. This insert fits the black plastic foot cover (not the metal foot).

These are my thickness gauge ‘sticks’ for rolling out clay. There are 2 ends and 1 middle to make various lengths in 200 mm increments. They are 6 mm to 10 mm in 1 mm increments.

These are my thickness gauge ‘sticks’ for rolling out clay. There are 2 ends and 1 middle to make various lengths in 200 mm increments. They are 2 mm to 5mm in 1 mm increments.

Dewalt Airlock to Erbauer Sander EHSS350 This is an all in one vacuum adapter to connect the Dewalt Airlock vacuum without multiple connections.

Dewalt Airlock To Macallister Sander MSCS110 adapter. This is an all in one vacuum adapter to connect the Dewalt Airlock vacuum without multiple connections.

Here is my embossed version of my first attempt at a 3D textured roller. Ceramics & Pottery Polymer Clay & Craft Dough Air-Dry & Craft Clays 120mm tall x 42mm diameter.

This is my display stand for the Saturn V Command Service Module. See my other stand that the Command Module sits on: https://makerworld.com/en/models/2674851-nasa-apollo-command-service-module-display-stand?from=search#profileId-2961296 The CSM model is by Ellipse: https://makerworld.com/en/models/778290-apollo-spacecraft-command-and-service-module?from=search#profileId-715138

This is a storage holder for Dremel (or other) bits. This holds 5 x 3mm and 5 x 6mm shank. The holes are 3.3mm on the lower level & 6.2mm on the upper.

I made this display stand to show the Command Module separate for the Service Module. The stand prints in 5 separate pieces, with supports, then glued together. The original Apollo CSM model by Ellipse. https://makerworld.com/en/models/778290-apollo-spacecraft-command-and-service-module?from=search#profileId-715138

I made this display stand to show the Command Module separate for the Service Module. The stand prints in 5 separate pieces, with supports, then glued together. The original Apollo CSM model by Ellipse. https://makerworld.com/en/models/778290-apollo-spacecraft-command-and-service-module?from=search#profileId-715138

Here is my first attempt at a 3D textured roller. Ideal for clay. 120mm tall x 42mm diameter.

I made this 100mm landscape disc to sit the Ingenuity model ‘made by the well known BRICKS manufacture’ on as it looked a bit lost on its own.

This is my ‘hanger’ for the NASA Orion model by RynosaurusRex. The base plate and name tag was inspired by the Early Nasa Rocket Garden 1:200 Scale models by King Jake. The ‘hanger’ fits into the original mount hole so make the model ‘upside down’ but I have mine on top of my display cabinet. https://makerworld.com/en/models/750377-orion?from=search#profileId-683972 https://makerworld.com/en/models/2052442-early-nasa-rocket-garden-1-200-scale?from=search#profileId-2215332