this is cool.

Need to pair this with the exact right toothpick otherwise it doesn’t work well

The “x” for the clicker insert is a bit on the small side.

shooting range not so impressive

Printed in PETG…a little rough, but it works so good enough. Thank you. I think the print length is too long though…I wonder if a slight design mod, could give you something useful with much less time? for example, larger diameter panel holes?

This works very very well. thank you!

Perfect. simple.

Fits puzzle perfectly

Printed “okay”. Small string like errors on open edge of side oval. Usable, but doesn’t look great if you look close.

Let’s try on the court! printed in TPU.

Came together nicely. great design

Simple and effective

Great quality print on XC1

Love this for backpacks.

Works well...I'm launching "industrial strength" bottle rockets with it (screw down to a wood support base) and it works well and is holding up.

Works exactly as advertised. Very simple and gives a nice little height boost. I placed some thin bumper pads underneath to stablize movement and prevent scratches.

Tolerance on the + insert for the key is too tight. Suggest making it larger to allow for better and more options for keys for the clicker functionality. (Hard to force fit a spring loaded press fit.)

Nice size. Robust.

Perfect and simple design.

Printed on XC1, like the original version. Despite some comments, I had no issues printing the original, although the threading was quite tight and needed silicone lubricant. This new version printed with stringing. I had to pause the print to correct and then had to clean design when complete to eliminate internal stringing. the threading on this new version is better, but I would recommend trying a 20% slower printing speed to lower risk of stringing.