Great Cover! Printed in ASA so hopefully it holds up long term in the sun. Will upload my settings as it took a bit of tweaking but came out perfect.

Perfect nozzle holder for the skadis board next to my H2D!! shaved off a few silicone sock holders and added labels.

kicking myself I forgot to take a good picture of these but they made great valentines gifts for some friends who love minecraft and have a pet axolotle! swapped colors to what I had loaded already from a previous print.

These are so cool, can't wait to gift them to my favorite readers! Printed with -Sunlu Matte Black -Bambu Matte Dark Blue (11602) -Bambu Matte Marine Blue (11600) -Sunlu Silk Light Gold

Possibly the most useful thing I've printed for the house! Sunlu Matte Grey and two Bambu Matte Blue's.

Love the design but ran into issues with the midsection as some others did. the top and bottom verticals have a partial shelf so they print fine but the mid-section has very little contact with the plate. I was able to successfully print it after reducing print speed and acceleration considerably. The H2D shakes a lot throwing that big print head around so slowing it down kept the piece from warping or shaking loose. Total print time for that slower print was close to 20 hours but worth it, can't wait to put it all together this weekend! Will upload my profile for the slower print in case anyone else wants it to be safe.

love these!

My daughter asked me to make these to go with her valentines. I scaled them to 90% (x/y only) to fit and they came out really good. I used matte white, matte black, and basic pink (matte red on snoopy).

Great little candy dish design! Ran out of red and threw in some purple. A “happy accident” that made a cool accent in all Matte.

I usually just use painters tape and a folded piece of paper for drywall dust, excited to have an actual tool now!

100mm in Ziro Matte Rainbow came out awesome

So Cute and prints perfectly. Not sure if it was needed but had my 0.2 nozzles loaded anyways so printed with those and the detail is awesome with the knitting and zero strings. A little super glue and they're ready for the wife and kiddo.

Fits great on my H2D and along with my exhaust setup finally eliminated the remaining fumes when printing ABS/ASA. I know you labelled it "yet another" but this really is the best one I've seen so far. Was about to design my own until I found this so thank you for the many hours it saved me haha. Huge points for installing/sliding from the TOP! So many designs slide to the side for emptying which sounds convenient but is just not practical with the exhaust on one side and manual spool holder on the other. The little bump out to give clearance for the vents on the back of the machine was just a cherry on top. Magnifico. Only small negative was that the screws went right through the ASA-CF mounting plate (not enough to bit into there, maybe thicken the plate overall and/or use a chamfer on the hole?) but I re-printed with regular ASA and that worked out a smidge better. Used clear PC for the bin, switched infill to gyroid, and used a 0.6 nozzle but otherwise used profile as-is.

Printed a bunch of these and put them out at our Krumkake party with acrylic paint markers, the kids loved coloring them!

Exactly what I was looking for in a Santa-themed candy dish. Was a little skeptical looking at the rendering but it's nice and sturdy on its feet. swapped the silver buckle for gold silk.

fits great on the new size boxes since the drawers are a little narrower than the older ones. Purchased mine oct 2025.