Not quite done yet, but nephew's gonna be stoked

Works great. I needed a little shelf that had holes in the bottom for my multi. Board kitchen sink organization? Although the hooks aren't quite long enough for the multi board and I had to get them warm with a Torch. And force it in to bend them a little bit, but that could be all kinds of different things. Such as all of that is printed out of nylon PA6

Love, it works great. It would be awesome if you made a glue on top extension piece for holding more plastic bags. Also, since my cabinet has a recess in the middle back. If there was one that was like, 2 inches wider would be nice, but I hung it with 3M double-sided phone core tape.

Works great printed out of black nylon. That was annealed in a high temperature dryer, and then processed with hot water so that it's a bit flexible and not so brittle

Came out great printed in black nylon?Great for my ams ht that will give up to a 105°C. Because I moved the thermometer from the heating element exhaust. It's true about where the center the school is. And there I slightly insulated that thermometer, so nylon was the choice. And it came out beautifully

It worked great, printed it out of nylon baby. I might try and print another one when this PPA cf. comes. Probably overkill but who doesn't love overkill

Works great. I used three d printed bearings and a little bit of p blaster p t f e spray lubricant on those bearings works great love it

I have quite a few of these for different size. Magnets love them all. I just printed the ones for the 8 mm magnets. I am using abs and the pusher cog, I guess is what it's called, doesn't fit. I am currently reprinting them. I had a 100.5 scaling to see if that fixes it. Because there is some wiggle room, but regardless. I imagine this issue is my fault for printing it from AB. S not his or his profile or catting because my 3 mm, 4 mm and 5 mm work. Great. And they're printed out a pet g and a b s whereas these ones are all a b s PS the 100.5 scaling on the pusher, cog worked. I took them off while they were still nice and warm slid them onto the magazine. Tube which took a little bit of force. And then I reamed Em in and out, while they were still all expanded, which wore them together just a little bit. And then once they finished, contracting works great

Works great.I'm using it with a ten millimeter socket in my milwaukee m twelve impact i print it mine out of a s a

These things are great. I print in mine out of ASA and I think because of the ASA and the bit of shrinkage, I cannot fit the PTFE tube in for the funnel saver. Easy fix if I wanted to. But they printed great, and they fit perfect, which is the weird thing, because if the shrinkage makes the tube not fit, I would think the whole thing shrunk a little bit. And wouldn't fit, so perfect. I mean, once it's in there, it fits into its little groove. And there's no wiggle room so a bit weird, but don't care.These things are great.They work great. and I've been looking at the AMS 2 pro, and I believe a big one could be made that fit the AMS 2 pro I would seat into that chamfer on the inside, which would be awesome. I currently do not have the CAD skills for it. But as I developed my skills and no one else has done it, i'm gonna try it

Printed great on the h two c straight from the handy app

They work great further degrade t p u s.Then, i'm using in my a.M s it's all the ones with the orange on the spool

All printed on the right hand nozzles of the H2C. With CC3D 57D and 40D TPU. By the way, done through bamboo handy app, click the little switch to use my profiles and select it. My custom TPU for AMS profile And the only thing I did there was turn the heat up a little bit.But it runs fine with no modifications

Printed perfectly. I had the one hand come off when taking the supports off. But I think that was more my fault. Anyways, I super glued it back on with some catalyst spray, and you can't even tell

cc3d hard tpu in ams that is 4 colors, and this is this last picture. Is the current printing of ATP U Asian style bookmark? In silk, white and silk gold t p u hard t p u

Works great. I had a fifty seven d silk gold t p u of theirs come from amazon with a broken spool on a few edges, so didn't wanna work in my a.M s because of that and these saved the day and now that I know my AMS can feed cut and retract this stuff through the AMS to all of my hot ends on my H2C. I have fifteen different colors coming now.So I just had to print a whole bunch of them. and the last photo is in the middle of my printer printing. Another TPU bookmark But I only have 2 colors. So white and gold, it is till Monday.

cc3d 57d tpu using bamboo lab TPU for AMS profile All printed through my AM. Ass on my bamboo app age 2C with both colors on the right nozzle swapping side Came out great gotta be an awesome gif for this girl that I know is gonna love it

sweet

asome

he has many friends and he has a new one growing