Version 370 horizontal bracket print profile. If you have previously printed the previous configuration, just print the connector from plate 2 in the configuration to replace it

Version 130 horizontal bracket print profile. If you have previously printed the earlier profile, simply print and replace the connector on plate 2.

Nut wrench, 0.2mm layer, 3 walls, 15% infill

0.2mm layer, 3 walls, 25% infill, 3D honeycomb infill pattern

370 Motor Version - Optimized Base (Recommended), 0.2mm layer, 3 walls, 15% infill

130 motor version - optimized base (recommended), 0.2mm layer, 3 walls, 15% infill

Optimized bracket base only, 0.2mm layer, 3 walls, 15% infill

A1 mini base, base only, 0.2mm layer, 3 walls, 15% infill

Optimized base for A1, base only, 0.2mm layer, 3 walls, 15% infill

Only 370 motor version replacement profile, base not included, the base is in the two print profiles next to it, 0.2mm layer, 3 walls, 15% infill

130 motor version replacement profile only, base not included, base in the two adjacent print profiles, 0.2mm layer, 3 walls, 15% infill

Just one pusher, 0.2mm layer, 3 walls, 10% infill

A tri-color ring, 0.2mm layer, 3 walls, 10% infill

0.2mm layer, 3 walls, 10% infill

Raised baseplate—suitable for A1 mini, 0.2mm layer height, 3 walls, 10% infill

Hookless version, 0.16mm layer, 4 perimeters, 15% infill

Hook version, 0.16mm layer, 4 walls, 15% infill

0.16mm layer, 3 walls, 15% infill

Version 370, 0.2mm layer height, 3 walls, 15% infill

130 versions, 0.2mm layer height, 3 walls, 15% infill