Strength Issue:This model hasn't really been modeled for printing, it's just a copy-paste of a high resolution game model. Lots of detail, but too much for a nice print. tweaked settings up to 20% infill to get the strength up to where it would mostly hold together in the thin spots.

Other Issues:Lots of holes in the model (because of the small/thin details not reinforced for printing), needed to tweak the program settings to ignore small overhangs, print thin walls, and at 125% of downloaded size before the print was stable enough to be of use. Rims had to be "sunk" into the plate in order to get them to stabilize enough to print properly (or print upside down and fight supports). Eventually got it to work, but the side scoops and front intakes are super thin/spaghetti looking.