Just uploaded my new Kali Linux magnet design. Sized at 70mm x 90mm and loaded with 8 magnets (12x3mm) so it actually sticks strong to fridges, toolboxes, garage cabinets, server racks, and more. Perfect little print for homelab and cybersecurity setups. Would like to see some remix color combos and where everyone mounts theirs 👀

Just uploaded a simple magnetic bottle opener that uses a real 5/16" washer for the striking surface and 4x 12x3mm magnets for mounting. I added print pauses at layer 71 & 81 so you can drop parts in during the print, and I also recommend putting a drop of super glue in the magnet pockets before inserting them so they stay while printing. Printed a few versions for my toolbox and office cubicle and it’s been solid so far! Would love feedback or remix ideas if anyone improves it 👍

Just released a new print-in-place sliding fidget and this one turned out exactly how I wanted 👌. The slider has a really smooth, controlled motion with a bit of resistance so it doesn’t feel loose or cheap. I’ve been keeping one on my desk and it’s quickly become my go-to for something to mess with during calls or while thinking through problems. Printed a couple variations already (black/red and all white), but curious what color combos you all would try 👀

Just dropped a new SKADIS accessory 👇 I had a bunch of Publix RX bottles floating around and wanted something cleaner than a drawer… so I made this holder. Fits perfectly on SKADIS and comes in 3, 4, and 6 bottle versions depending on how many you need. Super simple print, no supports, and snaps in solid. Would love feedback or remix ideas, thinking about expanding this to fit other bottle types next 👍

Just finished organizing my precision bench and wanted a clean way to mount my Wiha System 4 MicroBits set. Designed this magnetic holder to keep it off the desk and within reach. Uses four 8x3mm magnets with a pause at layer 21 for install. If you’re running a tight electronics or homelab setup, this might fit right in 🔧

Just dropped a new SKADIS mount for the Shelly Wave Motion sensor ⚡ No screws. No adhesive. Clean friction fit. Perfect for modular smart home installs, labs, racks, or anywhere you want motion detection without committing to drywall. If you're running Z-Wave + Home Assistant and love IKEA pegboard modularity, this one’s for you. Would love to see how you’re integrating motion into your setups 👇 #SmartHome #SKADIS #Shelly #ZWave

Finally gave my STIHL FCS-KM edger a proper home. Designed a purpose-fit wall mount bracket so it doesn’t lean in the corner like a misbehaving broom. Prints clean, mounts solid, and keeps the edger secure without stressing the shaft. If you’re running the Kombi system and want a cleaner garage wall, this one’s for you. Let me know if you want mounts for other STIHL attachments 👌

Just dropped a super simple quality-of-life print. These are low-profile lift feet for JBL subwoofers (fits feet up to 53mm). They sit directly under the factory feet and raise the sub just enough to avoid robot vacuum impacts and scuffs. No redesigning the base. No bulky platform. Just clean and functional. Print time is short, no supports needed. Let me know if you want a version sized for a different foot diameter 👌

Just finished a small quality-of-life gridfinity add-on for something we all use daily, GUM flossers. I got tired of the bags sliding around in the drawer, so I modeled two simple bins (39mm + 70mm) that keep them upright and easy to grab. Fits standard retail packs from Costco/CVS/Walmart perfectly. Let me know if you want other hygiene/first-aid modules and I can design more to match 👍

Just added a SKADIS-mounted holder for my cordless glue gun 🔥 If you’re building out a pegboard tool wall, this one’s a nice little quality-of-life upgrade. Check out my other workshop and organization prints on my profile too: 👉 https://makerworld.com/en/@Thundericious Happy printing!

🧀 New Print - Kraft Cheese Slice Holder Keep your Kraft single wrapped cheese neat and upright in the fridge with this simple holder! No supports, quick print, and super practical for everyday kitchen use. Perfect for PLA or PETG, and easy to scale if you want more capacity. 👉 Download now and make your fridge happier! Don’t forget to check out all my other designs too: 🔗 https://makerworld.com/en/@Thundericious Got ideas for improvements or custom sizes? Drop a comment!

Just added a Gridfinity Plackers Flosser Holder 🦷. If you’re already running Gridfinity in your bathroom or drawers, this is a simple drop-in solution to keep flossers tidy and accessible. Quick print, no supports, and designed around the common Plackers flossers you can find at Costco, Target, or Walmart.

Brought an old pair of Nikon Stayfocus Plus II binoculars back to life with this quick replacement front ring and lens cap. Super fast print, no supports, and a clean friction fit. If you’ve got vintage optics with cracked or missing trim, this one’s an easy win. 📷

Another small SKADIS quality-of-life upgrade. I got tired of my punch down tool rolling around or getting buried, so I made a quick, clean holder that snaps onto the IKEA SKADIS pegboard. No hardware, no fuss, and it prints fast. If you’ve got a network rack, patch panel, or home lab this one just makes sense. Feedback always welcome 👍

Ever open a pill organizer just to grab one compartment and end up with pills everywhere? This divider lid closes off two sections so you can flip the container over, open it normally, and access just the one you need. No mods, no changes, it closes like stock. Quick print, simple fix, and one of those “why doesn’t this already exist?” things.

I finally got tired of pill bottles rolling around and disappearing, so I made a Publix pharmacy pill bottle holder that mounts directly to IKEA SKÅDIS. It’s sized specifically for Publix bottles and keeps everything visible and easy to grab. If you want to go a step further, you can also print custom labels using MakerWorld’s Label Maker to keep things extra clean and organized. As always feedback is welcome 👍

I got tired of guessing what was in Publix bottles once they were sitting on my IKEA SKADIS, so I made simple top-label inserts that drop right into the cap. Super fast prints, easy to swap, and way more readable than side labels. If you’re already using Publix bottles for storage, this makes them much nicer to live with.

Just uploaded a SKADIS-mount version of a DeWalt 18V battery holder (remix of #990981) remapped from screw-in mounting to peg-in for IKEA SKADIS. I wanted a cleaner way to store my 18V batteries on my peg tool wall without drilling or screws. This version fits standard SKADIS peg spacing and keeps the batteries up high and accessible. If you’ve got a SKADIS setup for your workshop, this pairs nicely with other holders. Feedback and remixes welcome!

Just uploaded a Hakko FX-888D holder for IKEA SKÅDIS. I wanted a simple way to keep my soldering iron off the bench but still easy to grab during use. This mounts directly to standard SKADIS pegboards and holds the iron securely without any modifications. Printed cleanly in PLA with no supports. PETG would also work well if you want extra heat resistance. If you’re running a SKADIS-based electronics bench, this pairs nicely with other wall-mounted tool holders. Feedback always welcome.

Just uploaded an SAE T-handle Allen key holder for IKEA SKÅDIS 🧰 Designed to keep imperial sizes organized and easy to spot: 1/4 through 3/32, no repeats, no adapters. Snaps straight into SKADIS, prints without supports, and works great with color-filled size labels. If this cleans up your tool wall, a boost is always appreciated 🚀 Feedback and remix ideas welcome, metric version is already live too. https://makerworld.com/en/models/2144506