Several simple models to help you raise/extend the mounting of your Ubiquiti G6 Turret camera. The model exactly matches the base diameter in variation 20, 30, 40 and 50mm of height. It has M3 screw holes for the camera mounting , and some sunken holes for mounting the riser. At the bottom there's a channel prepared for side entrance of the cable. You can carefully remove that thin wall when needed.

I never likes having 19inch equipment just supported only through the front brackets. After I installed my Ubiquiti switches, I was in need for a proper way to better support these modules. It matches the standard holes of a 1U 19inch/10inch mounting rail. Depending on the way you mount the brackets, it gives some additional support to your gear. The plate contains two mirrored brackets. Hopefully others might find it usefull as well.

After I installed the rest of my Ubiquiti gear, I was in need for a proper way to mount the U7-IW (in wall) access points. After a quick search I couldn't find any that matched this perticular shape of the U7-IW model. As such I created this version. It matched the standard holes already in the metal plate, however it now raises it 25mm from the wall. This gives enough clearance to plug a RJ45 in and not have to straight bend the UTP cable. Hopefully others might find it usefull as well.

I found that the standard door knob on the P1S door to be kind of a hassle to use. As such, I just created this small round version which is 40mm in diameter and has a 10mm clearance. I also added the Bambu labs logo on it for esthetics. You should be able to choose your own colours of course when printing, or even decide to just do one colour by changing filament settings. Included are 2mm threaded holes that will fit the default door knob screws.

Because of drinking too much coffee, I had to keep filling the hopper of my Sage Barista machine. As such I created this simpel hopper extender to increase it's volume to a certain extend. Because of available space and estectics, I kept the extension within a reasonable size. This extends the default hopper by an amount that fit my purpose, so perhaps yours as well.