Great design! Printed perfectly. I used Bambu TPU 90A Frozen for this one and even though this might not be the ideal material choice it bounces well and is fun to play with.

Great design. Printed with Bambu TPU 90A Frozen. It looks almost industrial produced and feels nice and squishy, but it does not bounce well due to my filament material choice. Next time I’ll try flexible PLA instead.

Nice design, prints perfectly without problems while not using supports, printed on BambuLab P1S with Sunlu matte black filament.

It just prints perfectly and works as expected.

Very cool n funny design with good quality. Important tip if you print it from your computer and not from the Bambu handy app: Before you hit print make sure to check the settings of the color for the supports. At first I didn’t notice it was set to a completely different color, other than the two main colors black n white in my case. The print would have taken 11h and 160g. Luckily I noticed it after the first object (the stool) finished printing. I stopped the printing, changed the settings and printed the other two parts separately. Took < 3h and 45g in total

I really like the simple and funny design. I scaled it down to 50% and on Z only down to 25%. At that size it’s easy to hold in the palm of your hand and you don’t waste filament in the thickness of the card. Printed with Sunlu PLA Silk White on top of Sunlu PLA matte black on BambuLab P1S with AMS in 28min.

Aswesome design with high quality. Printed in Sunlu PLA+ Silk Gold on BambuLab P1S with .12mm in just over 2h. I used custom painted supports, though the ones on the print profile might have been just as good.