I made one at the request of a friend and he absolutely loves it. The overhangs were a little gnarly when I used Sunlu High Speed PETG - if that matters to you, you may want to tweak the variable layer height settings. But it won't be visible in use, so if it is for yourself or someone who understands 3d printing, it's totally fine.

The only issues I had were like due to me changing the profile, playing with variable layer height (I have the E3D high flow nozzle, which doesn’t seem to like layers less than 0.16 mm).

Worked well - I'm glad I can use my Inland spools in the AMS now

I don’t have an actual kamisori - I have a shavette that uses Feather’s long style blades. I scaled it up 120% in width to 9mm. Since I am using a different style of razor, it’s no fault of the design when I say that I’m not sure if it will hold up. The shavette is way thicker than any traditional blade, and is a simple wedge shape rather than the profile that comes from a hollow grind. I likely will have to design my own, but this is a great solution for the time being.

The part of the balloon string/handle that protrudes below the ghost's hand became spaghetti, but the print as a whole didn't fail. I don't think it's necessary for it to protrude beneath the hand - if I were to do it again, I'd use a negative modifier in the slice to remove it. Also, I don't understand why the walls around the eyes are thinner. Just as it shows in other users' photos, I can clearly see rectangles around the eyes when the light is on. I don't mean to sound too critical - my gf loves it, and that's all that matters. But I think the model can be improved.

Worked great for my needs, even after scaling and cutting!

very helpful!

worked well - fit was perfect. switching between a hardened 0.6 for fiber-filled/abrasive filaments, and a 0.4 E3D high flow for everything else, I like that I have a place for safe keeping whichever hotend is not in use.