I have only printed pos. 2 and 4 so far - but the print is amazing. I was blown away by the quality and detail of the design. The mechanism also functioned great, and doesn't block my desiccant holders that I printed previously. Do yourself a favor, and print the tube cutting assistance tool linked in the project description. It's going to make the process easier, and you will get far better cuts - don't be lazy like I was at the start. You already have a blade you can use if your making this project.

A must have tool if your making the cutter. Learn from my experience, and start with this tool! Using the filament cutter for the printer works perfectly fine in a pinch.

Had some issues with the small containers on the side - turns out I had them swapped! I am very happy with this design, and will be reprinting them with a more thermally resistant material soon.

Still waiting on my PTFE connector, but I’m pretty happy with the model. I did switch to M3x10 screws for the top two holes. I also had to reprint the PTFE holder, since supports welded to the side and ruined the finish.

the handles are a little small to provide much benefit, but I still think it looks better then the stock Allen wrenches.

After an assembly mishap - this quickly became my first print. Turned out great! 10/10