Unbelievably adorable toy! 👍

super fun ☺️

0,16 mm, 3 PLA colours and 7,6 hours, but it is fun! However, there were some misprints and some sticked layers, but after a cleanup everything started looking very nice, 👍

This was a very beautiful, but very challenging print.🤩 The only reasonable way was to use manual trees, otherwise it becomes so complicated with the trees that it's impossible to be cleaned up. We trusted the creators approach with trees and it really worked! 👍 However, I guess that not every PLA filament will be good enough to sustain this kind of a printing, as we have attempted with E-sun filament "Copper" and it just breaks, at the back of the horse.

This test turned to be very fruitful. We have P2S, using only PLA. In another detail we have experienced very weird, brittle issue with one E-Sun filament. After many disappointments I decided to use this test. On attached screenshots you can see tests with E-Sun "Silk Copper" (very beatiful golden collour), versus AzureFilm "Red Transparent" on 0,12 high-quality. For E-Sun we have tested 195⁰, 205⁰, 220⁰ also 3 walls and even changed the shape of the infill - all tests broke very low at the solid area???😳 The AzureFilm succeeded from the first attempt with the default settings! We will never by E-Sun again 👎 (the E-Sun filament was just opened and the humidity in the AMS is constantly 36%)

Very sweet 😍! Print on P2S, 0,12mm highQuality, 200⁰C

just beautiful 👍

unbelievable cute 🤗

high quality adjustment made it very cute 🥰

we have enlarged the walls and wiggle the print, yet everything printed really beautifully