This is great. l scaled these up. I’m making a little plug to glue to the bottom of the finial cap so it stays self centered. I may make a pull up storage compartment.

fit was incredible. I modified the star with my sons schools mascot and we made some for his class as a gift. they were a hit!

looks great. again I bumped it up in size for the H2D and made a Camaro cover for the other side.

I blew it up to max out the H2D. so big I had to print the ring attachments separate and glue them on. looks great!

I did some reorienting to clear up the quality. I made this into a key hanger. I ended up leaving off the plate just because it didn’t fit well. thought about adding part of a front tire but I’m just not sure.

Wow. I just say this one was a bit of a challenge. but after the Lambo I could feel with it. The main tail light and wing supports were the most difficult to orient well to get a clean finish. nothing is quite flat. I ended up braking out the support for PLA to help and finally get them done. Bottom line of your parts is your friend, for both printability and aesthetics. o could do better if o did it again but I’m happy enough with this one.

a little layering issue on the side so I’ll just print it again tilt

fit was tight but things can be shoved in. if you print the body flat then you get a lot of wide steps in the layers and it look bad. I’ll print in angle later.

this thing is great! I used Silk and transparent for the tail lights. I also added a little more detail to them darkened raised centers on the stop lamps and reverse in the turn signals.

it’s more nature of the shape but I would maybe offer a plate with the parts on angle with supports for a better finish option. I made a couple colors and ended up printing those two different ways just because it made a difference in the shade the galaxy colors came out. with a little trimming fit was great. I also deleted the filament changes and just painted the parts in studio.

the install is fiddly, but that’s because I have a later unit with the larger hinge and it would not adjust. heat gun works well in getting the adhesive off the glass.

these look great. I thickened the lower black layer and recessed some magnets.

just a little bit of flex once hanging. still it’s a good print.

sorry I don’t have a pic of it completed but it is great! it’s for a friend of mine and I’m just getting time to do it for him. I did add some ironing in there on everything other than the silver silk I used. it just flattens the sheen.

it would be nice to have the spoiler key in a little better with the stantions to make sure they are straight. I also had a hell of a time with the lower valance and the supports not wanting to break off, or the exhaust to fit in. I ended up printing these like 4 times. Re-orienting did the best.

worked pretty well. I might like a little taller and longer version with more engagement but they worked. that’s what matters.

I took these and blended them with a spin wheel for selecting cookies. it’s awesome!

I increased the size and took some wording from another cookie related model and merged them. looks great and I made sure to balance the wheel.