Print Profile(6)
Bill of Materials
.jpg){kind=small}
Description
Yes, another ceiling grid hook but these are strong! 💪 There are multiple sizes available and I'd be willing to make more upon request. 😁 The hooks are printed in two halves and are joined with a “live hinge” which the halves fold together along. As you close the hinge, the ends clamp round the ceiling grid. Once set in place, make it permanent with a zip-tie! These are designed with just enough tolerance to slide along the grid even after being zip-tied in place.
Be sure to clip off the integrated supports (as shown in the GIFs) before mounting! ✂
Print the STLs as oriented.
I hope you find this print useful and please post your makes!
Material: PETG - Or stronger filament. PLA with deform over time.
Layer Height: 0.2mm - Lower for finer layer lines.
Perimeters/Walls: 3 - Add more for more strength.
Infill: 15% Cubic - Increase for more strength.
Brim: NO BRIM - This could interfere with the live hinge design.
Supports: NO SUPPORTS - Necessary supports are in the design. Clip off before use.
If you love this model, please consider Buying Me a Coffee or maybe send a tip via Cash App! ♥️
https://buymeacoffee.com/claytr0n
https://cash.app/$claylinco
Boost Me (for free)
If you found this model helpful or entertaining, please boost it!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (84)