SD Card / Micro SD Card Holder round with cover by Karl XXX

Karl XXX

Tools>Organizers

Print Profile(6)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

4.1 h

1 plate

4.8(68)

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

Designer

3.8 h

1 plate

4.5(4)

0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill

Designer

3.8 h

1 plate

SD Card Holder Cover Rounded (0.6mm nozzle, 0.3mm layer, 3 walls, 10% infill)

Designer

1.2 h

1 plate

Click to see more

Boost

146

268

757

517

Released

Description

Organize your SD Card Collection.

Also capable to carry 12 SD cards and 12 micro SD cards with you.

With: 10 centimeters

Hight: 4 centimeters

If it is too tight, you can try using the XY contour compensation in the slicer. (just one part. Top part +0.1 or bottom -0.1)

Comment & Rating (86)

@user_133014075

Print Profile

0.2mm layer, 2 walls, 15% infill

It's possible that I'm using the wrong filament; I used white PETG. When I try to screw on the lid, I can't get the two parts to fit together. I'm a beginner at this, so I'm not sure if the error is on my part or if there should have been more space for the lid to be screwed on more easily. Otherwise, it's a very nice print.

The designer has replied

@KarlXXX

I think PLA is easier for this model. But if you want, you can print one of the parts again with the XY compensation I described in the model description. (also with PETG)

(Edited)

@user_3388204030

Replying to @KarlXXX :

I found the first few times it was difficult to get lid on and off. Seems fine now. I used pla+

@MagicJJ

Print Profile

0.2mm layer, 2 walls, 15% infill

it printed fine. bambu pla matte

@fut.off.sides

Print Profile

0.2mm layer, 2 walls, 15% infill

I liked very much here you have some pictures

@tonytone20

Boosted

fits perfect. PLA glitter silver smart material 3D

@patrick33x

Print Profile

A1 mini, 0.2mm layer, 2 walls, 15% infill

It worked perfectly to print it, but i just didnt find it that usefull anymore, since the Case is a bit to big.

Other Issues

@RickyVet

Print Profile

0.2mm layer, 2 walls, 15% infill

A little bit big but nice

@chunkahoy

Print Profile

0.2mm layer, 2 walls, 15% infill

Great! now my kid can’t eat the micro-sd cards 🙏🏻

(Edited)

@VJPPEREZ

Print Profile

0.2mm layer, 2 walls, 15% infill

cómodo

@user_3388204030

Print Profile

0.2mm layer, 2 walls, 15% infill

Very pleased with this. Came across the file by chance. Thank you for sharing! It printed out well. As other comments, initially screwing lid on was stiff, but after a while it works OK now.