This model was designed to have a fast to print vase-mode phone stand; my main goal was to have one with a variable angle, so I used a gear shape in the two composing parts in order to let them fit in different ways depending on your needs. You should print either: base+full-size stand, or base+2x half size-stand, the second setup allows to have a hole in the middle to plug your charger.

Gcode files and vase mode: gcode files are for PLA, Prusa Mini, .25 layer height, and use a 0.9 line width for perimeters (yep this works well for 0.4 noddles), in order to give some rigidity to the model. I used a single bottom layer in those files, in order to avoid the brim but at the same time speed up printing time.

Non vase-mode print: just print as usually, it will be more robust but will use more time and material of course.