A snow blower truck is a machine that removes snow from areas like driveways, sidewalks, and roadways. It can also be used on railroad tracks, ice rinks, and runways. Apart from the blower attachment it can also have others like plows etc.

I am very thankful to Mr Benoît Lussier for his feedbacks which has helped me refine the model further.

There are three ways to print this.

1. As single piece:- Please download STL file but there wont be any movements.
2. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf.BEST QUALITY OUTPUT. Please use the 3mf file for assembly also.
3. Combined:- You may use any 3D viewer software like 3D builder in windows to merge components according to your printer and filaments. The sky is the limit for this. You may find a sample file ending with combined.3mf.

ASSEMBLY OF UNDERCARRIAGE

ASSEMBLY OF MAIN BODY

Follow the GIF for assembly of payload.

ASSEMBLY OF BLOWER

Follow the GIF for mating of payload with truck chassis.

Movements Included

1. Front Wheel Steering
2. Engine Bay Cover Swing Open
3. Rotating snow screws
4. Rotating snow funnel
5. Swing open second engine cover

NOTE The tolerances to some elements are zero which has been intentionally provided to friction lock the elements while not in movements. You may have to fine tune the tolerance from your end using scaling function in slicer to ensure good fit without compromising movements. This also applies for the pins that make rotation possible between elements. Please proceed with printing all the pins after testing printing a pin and testing the fit of a joint. You should be able to find the adequate scaling factor with this.

The main body is made hollow to ensure filament savings.

Supports should be provided as required.

Appreciate the makes uploads. Open for suggestions.