Arcane - Vi by PantheraSyv

PantheraSyv

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.08mm layer, 2 walls, 100% infill

Designer

4.9 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Vi in Arcane

Made with HueForge.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

The Model is 200x200mm in size

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA+ Esun Red Transmission Distance: 3.5
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA+ Esun Magenta Transmission Distance: 3.1
    PLA+ Esun Pink Transmission Distance: 4.5
    PLA+ Esun Silver Transmission Distance: 1.1
    PLA+ Esun Orange Transmission Distance: 4.7
    PLA+ Esun Skin Transmission Distance: 3.8
    PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 9 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Red
    At layer #7 (0.64mm) swap to Blue Gray
    At layer #8 (0.72mm) swap to Red
    At layer #11 (0.96mm) swap to Magenta
    At layer #13 (1.12mm) swap to Pink
    At layer #14 (1.2mm) swap to Silver
    At layer #16 (1.36mm) swap to Red
    At layer #17 (1.44mm) swap to Orange
    At layer #18 (1.52mm) swap to Pink
    At layer #19 (1.6mm) swap to Skin
    At layer #22 (1.84mm) swap to Jade White for the rest.

Comment & Rating (4)

@life_bites_

is the transmission distance a property of the specific filament or is it a setting for the print? I typically use all Bambu filaments but would buy other ones if it’s needed for the print to work well

The designer has replied

@PantheraSyv

This is a filament-specific priority

Show original

@life_bites_

Replying to @PantheraSyv :

Thank you! Where do you find this information? I’m looking at the TDS for the Bambu Basic PLA and can’t see where it shows transmission distance. Thank you!

@PantheraSyv

Replying to @life_bites_ :

The TD isn't written anywhere. You can find some information online. However, it can be calculated, but you must have already purchased the filament. A good explanation here from the creator of the Hueforge program: https://www.youtube.com/watch?v=iPjsLEmgbog&;ab_channel=HueForging Otherwise, the program itself contains a database of DTs from several different brands. But again, the DT can change from one batch to another. A slight variation in the DT between the information provided for the filaments I used for printing and the filaments you have shouldn't prevent a print that closely resembles my image.

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(1)

Description

Comment & Rating (4)

License

Related Models

Arcane Vi - Hueforge

DnD Miniature Ancient Arcane Portal

Caitlyn Arcane Season 2 Poster

Jinx's Smoke Bomb - Arcane