A hygrometer desk stand for the popular circular types of hygrometer that are easily available online. I discovered that there must be a few different types of these circular hygrometers available, some of which have a subtly different diameter for the body of the device, and the locating tabs are sometimes at different angles. I therefore decided to design my own from scratch so that I could control the precise dimensions.

This model is known to work with the hygrometers available from https://amzn.to/48oTCsW .

I have a fully parameter driven design available, so I could remix the design very easily to accomodate locating lugs at different angles / offsets, and also adjust the lean angle of the stand if anyone requires something different.

The current settings for this design are:

• Hygrometer diameter = 41.20 mm
• Notch angle = 34 degrees
• Notch width = 6.25 mm
• Notch depth = 0.80 mm
• Stand lean angle = 15 degrees