This is a filament guide for the cr10 v3 that allows the use of bearings to guide the filament into the sensor without much/any friction.
I used some flanged bearings I had around.
When printing the pins, I suggest you scale it to 98-99% in the slicer to make it fit.
You'll have to use longer screws than the original ones to mount it to the metal frame.
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20
Filament:
SUNLU ABS Blue
Notes:
Print this using petg or abs, I recommend using tree supports, as shown in the picture for painless removal!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.