The third in the 'Oversized Pokemon Card' collection, I present to you Bulbasaur! This Hueforge hybrid printing method combines filament painting and traditional 3D printing to create a 'hybrid' piece that has a 'pop out' feature in the print.
This model complements the Oversized Pikachu and Oversized Squirtle HueForge hybrid cards.
If you are using a Bambu printer, or Bambu Studio, the included 3MF file will already have all the settings applied to the print, including the colour swaps and print settings for the hybrid part of the model. Otherwise, use the STL file with the following print settings:
For the HueForge part of the print (0mm-2.16mm)
For the Bulbasaur (2.16mm - 40.12mm)
Filament Swap Instructions
Filaments Used:
Swap Instructions:
Post Processing
You will need to paint Bulbasaur! I used paint pens to make it easier :)
I used this super cute Bulbasaur model by HexHyte for this hybrid!
___________________________________________
If you'd like to support me, I now have a Patreon!
Joining will give you behind the scenes information on WIPs, access to a private discord, early access AND exclusive models!
If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!
___________________________________________