Made this propguard for a request. It is similar to the 56mm propguard, but it's a bit more beefy at some points, thus it might be heavier. I haven't tested it, since i use the 56mm version of the frame. feel free to contact me if something is wrong. ;)

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0,1

Infill:

Notes:

i suggest 0.1mm resolution, with 2 outer lines, and 4-5 solid top and bottom layers, with 0% infill. This is just a baseline, you can modify these settings for your taste.