Updates:

2023-12-19 - Made the allen keys easier to remove

2023-12-22 - Added space for the PTFE comb and added space for the A1 standard nozzle wiper.

2023-12-25 - Added more labelbodys for the a1 standard.

2023-12-28 - Added slightly more space for the A1 standard nozzle wiper.

.

Introducing my small accessory box for the a1 series that fits all of the a1 accessories with a lid that locks in place. A bunch of different labels have been provided to fit your needs. :)

.

Designed to be as compact as possible and with a similar lid deisgn as my other accessory boxes you can just slide the lid on the underside when the box is in use and then put it back when the box is being stowed away. The lid has a new locking mechanism i have been working on and can easely be released by pressing both of the release “buttons” on each side.

.

I have provided a blank lid and label if that is your preference :)

.

I printed the lid and label with 1mm top and bottom thickness to avoid any infill and the bottom of the box is printed with 0.6mm bottom thickness and 1mm top thickness with 15% gyroid infill. Everything else is stock bambulabs settings.