Train WashingStation - Brio compatible
Copyright Claim
Train WashingStation - Brio compatible
Boost
8
34
4
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
8.3 h
2 plates
Working multi-color profile without AMS required
8.3 h
6 plates
Open in Bambu Studio
Boost
8
34
4
0
51
52
Released
Comment & Rating (4)
All
Print Profile
Working multi-color profile without AMS required
no 1
2
Reply
Print Profile
Working multi-color profile without AMS required
Missing Model Parts:Track stop piece does not connect as shown in the picture.
The designer has replied
0
Reply
Can you please upload a picture and show what exactly is not working? What material have you used for the print?
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
(Edited)
Support Issue:The barrier requires supports, the long pieces that are under the roof require brim.
Strength Issue:Only a single layer under the 4 blocks holds the roof, which easily breaks with minimal pressure from above. This is for children...
Missing Model Parts:A female-female connector between the stop and the station is missing.
The Washstand parts are in the picture but not in the model/profile.
Other Issues:The 3 blocks that hold the roof in front do not fit. I needed my Dremel.
I will upload a working profile. Don't use the designer profile.
1
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld