Bambu Chest of Drawers Toolbox (SBox)

This is a chest of drawers Bambu Lab toolbox for all your DIY items. Its super sturdy and one part of a two part system, the other being double cantilever toolbox. The drawers lock by rotating the handle to prevent them coming out when carrying it. It's also modular and can be expanded further by printing the middle drawer multiple times. It has a retractable handle and the two units lock together for carry. Click here for the second part double cantilever toolbox. 

The profile is “0.2mm strength” but you can change it if you dont plan to carry anything heavy in it. I suggest you turn off the AUX fan to prevent warping as the toolbox uses most of the build plate. I added a Bambu Logo to the lid and optimized everything into one easy to print profile. There is a BOM at the bottom for all the items needed for assembly. Make sure to use the 3mf file to get all the features. 

list of non-printed parts

• 4 pcs - metal axis 35mm x 3mm 
• 8 pcs - metal axis 40mm x 3mm 
• 6 pcs (2 pcs per drawer) - M3x12mm screw with internal hex head
• 12 pcs - M3 x 12mm 
• 2 pcs - metal axis 25mm x 3mm (for top with handle)

You can use cylindrical pins, stainless steel shafts in M3 diameter or M3 screws for the pins listed above.

All the items needed are at the BOM at the bottom.

These take some time to assemble but you get great satisfaction when they are done! 

Click here for the SBox single cantilever toolbox.

Click here for SBox sturdy folding crate.

Click here for my new sturdy drawers.

Click here for all my other models!