Engineering Flowchart
Print Profile(2)
Description
EDIT: Just condensed the text of the flowchart to give more clearance for bottle height and tape. Height from shelf top to “Yes” is 124mm (~4.88in) and top of tape peg is now 104.5mm (4.15in)
3D printed version of the joke “Engineering Flowchart”. Put your favorite roll of tape on the left peg and your lubricant of choice on the right shelf. The 3 oz. bottle of WD-40 is slightly too tall and will cover the “Yes”. If anyone is aware of any lubricants that would fit the space better, leave a comment. There are 5mm holes in the top corners for hanging. Prints in about 4 hours with a single color change.
IMPORTANT! TURN OFF YOUR AUXILIARY FAN AND MAKE SURE YOUR BUILD PLATE IS CENTERED! This print has dimensions of 235 x 245 x 72mm, so it is using all available space on the plate while still allowing space for the purge line. The Auxiliary Fan also tends to warp prints
Since there is only 1 color change and not within the same layer, this print is non-AMS compatible. You just need to do a color change on layer 11, assuming .20 resolution
Dimensions:
Width: 235mm (9.25in)
Height: 245mm (9.65in)
Depth: 72mm (2.83in)
Mounting Holes: 5mm each
Top of Tape peg to bottom: ~3.25in Now 4.15in
Tops of Lubricant shelf to bottom of “Yes”: ~3.75in Now 4.88in
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)