Saw handle, hacksaw handle, blade grip

Copyright Claim

Saw handle, hacksaw handle, blade grip

Boost
324
752
31

Print Profile(2)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

0.28mm layer, 6 walls, 30% infill
0.28mm layer, 6 walls, 30% infill
Designer
1.3 h
1 plate
4.7(20)

For A1 Mini, 0.28mm layer, 6 walls, 30% infill
For A1 Mini, 0.28mm layer, 6 walls, 30% infill
1.4 h
1 plate
5.0(3)

Open in Bambu Studio
Boost
324
752
31
14
321
171
Released

Description

Hacksaw handle for standard hacksaw blades  (0.5" → 12.7mm wide, 0.6 - 0.7mm thick). Sturdy and safe tool for your workshop! This print contains almost no supports :)

  1. Print handle (PLA, PETG or other material)
  2. Remove supports for nuts
  3. Remove support with blade (as on the picture)
  4. Use two M4 screws and screw on the blade

Boost Me (for free)

Thank you for any support! 👍

Comment & Rating (31)

Please fill in your opinion
(0/5000)

Printed without issue, worked as expected. Saved me about $25 on buying a similar tool at the hardware store.
The designer has replied
1
Reply
Thank you for review and support!
0
Reply
Boosted
Print Profile
0.28mm layer, 6 walls, 30% infill
impression ok
The designer has replied
1
Reply
Thank you!
0
Reply
Print Profile
0.28mm layer, 6 walls, 30% infill
printed awsome in eSUN PLA+, made a profile for my A1 Mini, just the same settings but fits in a A1 Mini plate and adjusted the Z-distance on the support to be a little bit easier to remove 😊👍
1
Reply
Print Profile
0.28mm layer, 6 walls, 30% infill
Simply brilliant
Show original
0
Reply
Print Profile
0.28mm layer, 6 walls, 30% infill
Front gap was tough to clean out but after that I'm happy with it.
0
Reply
Print Profile
0.28mm layer, 6 walls, 30% infill
Turned out really well, comfortable to use
Show original
0
Reply
Print Profile
0.28mm layer, 6 walls, 30% infill
muy buena calidad
0
Reply
Print Profile
For A1 Mini, 0.28mm layer, 6 walls, 30% infill
The designer has replied
1
Reply
Thanks!😊👍
0
Reply
Print Profile
0.28mm layer, 6 walls, 30% infill
0
Reply
Print Profile
0.28mm layer, 6 walls, 30% infill
printed perfectly, used a blade to clear out the inner supports, functional, thanks!
The designer has replied
0
Reply
Thank you for review!
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.