This is small travel box for pills.
Recomended settings for smooth thread: Layer hight 0.12mm, Infill 10%
There are 3 options for the lid:
- Separate cross which should be glued to the lid (PillBox_Lid.stl, PillBox_Cross.stl)
- Cross part in the lid, suitable for multicolor print (PillBox_Lid_Cross_multicolor.stl)
- Lid without cross (PillBox_Lid_without_Cross)
There are 2 options for the body:
- One compartmant (PillBox_Body.stl)
- Two compartments (PillBox_Body_Two_Compartments.stl)