I designed this model to be able to easily add Command Strip mounting to my models. The design is two parts and includes a bracket that attaches to the wall with the Command Strip and a clip that you can incorporate into your model to hang on the bracket.

The brackets can be printed from the provided print profiles and the clip STEP file can be downloaded from the raw files.

Three sizes have been provided and have the following recommended maximum weight limits (per strip):

Large Strips - 5 lbs

Medium Strips - 3 lbs

Small Strips - 0.5 lbs

The weight limits are just estimates based on the standard hooks 3M provides for these size strips. Your model may be able to hold more or less.

Check out my Command Strips collection to see designs that use this mounting system.

Warning: If you print a third party profile you may not be getting the latest version or the highest quality print.

If you like this project, please don't forget to ❤ Like and ★ Rate!

* Some of the links above are Amazon Affiliate links