Prism Pot

The last pot I designed had a screw on hidden drip. I felt like it was difficult to screw on and off so I decided to make one that used a twist lock. The way this pot is designed makes the drip tray really hidden and discreet. 

The pot in the pictures is a 4 and 5 inch pot made with Elegoo Rapid PLA Plus Beige and White. 

The STLs have been posted with the 3mf. Each pot should be printed as is and not scaled due to the fitting of the twist lock drip tray. Each size has been designed for the best fit, so any scaling of the models may lead to a twist lock that does not work as well.

My models are not to be sold or distributed and are for personal use only. 

This print profile is for print bed with 257mm x 257mm build space. The profile will not fit on A1 mini. To print on A1 mini please download and arrange as needed.

~Pot Sizes~
3"
Opening: 3.1"
Height: 3"
Inside Depth: 2.42"

4"
Opening: 4.02"
Height: 4.13"
Inside Depth: 3.22"

5"
Opening: 5.03"
Height: 5.16"
Inside Depth: 4.03"

In the print profile I use is a version of the 0.28 layer height default with changes to minor things, like infill type. I find using 0.28 layer height gives a good result at a reasonable time. No supports needed.

If you enjoy my model let me know and comment with a picture of your prints.

Thanks and happy printing!