4-color HueForge VW Volkswagen Van Bus 02 by a.vdh_1983

a.vdh_1983

Art>2D Art

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.08mm layer, 2 walls, 100% infill

Designer

8.2 h

1 plate

5.0(26)

The Rusty Bastard (8 colors!)

5.6 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

128

250

118

Released

Description

If you like my work, i'm open for donations via Paypal. It is much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.8
PLA BambuLab Basic Blue Transmission Distance: 4.8
PLA Jayo Light Gray Transmission Distance: 2.4
PLA eSUN White Transmission Distance: 1.6

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue
At layer #11 (0.96mm) swap to Light Gray
At layer #17 (1.44mm) swap to White for the rest.

volkswagen

vw van

vw bus

Comment & Rating (30)

@Sesty80

Print Profile

0.08mm layer, 2 walls, 100% infill

impeccable aucun problème. J'ai juste changer les couleurs et ajouter un cadre.

(Edited)

@bnlschick

Print Profile

0.08mm layer, 2 walls, 100% infill

turned out wonderful

@insle

Boosted

Print Profile

0.08mm layer, 2 walls, 100% infill

Absolut geniale Datei! War nicht die letzte Version.

(Edited)

@bjondal

Print Profile

0.08mm layer, 2 walls, 100% infill

Super Arbeit und hat einwandfrei geklappt

@diff

Print Profile

0.08mm layer, 2 walls, 100% infill

Really nice !! Thanks !

(Edited)

@aroyom77

Print Profile

0.08mm layer, 2 walls, 100% infill

simplemente Expectacular

@Leo.siwicki

Print Profile

0.08mm layer, 2 walls, 100% infill

printed very nice on my A1 Combo.

@Heisenberg_Carb

I loved it, it's awesome!! I changed some things, tho. I'm gonna call it "The Rusty Bast*rd". It prints honestly in 5hs 30' using 56g of stuff. In pictures you can see my profile in its main tweaks. Add for using one only wall on top and bottom, which is not shown there. The line width tweaks also adds much to the rusty effect as it lowers the print time. For the colors it turns out you there's a bundle named Amazon Basics that for 25 bucks offers you 1.2 Kg of assorted filaments. It has the two key colors used for this result, other 6 compatibles to clear this print, and other 12 which...they're filaments, dude. It's cheap and in my unpaid opinion they print at 20 mm3/s. Could have better bed adhesion. Would I use them for stressed parts? NO. Am I going to rebuy some of their colors in 1Kg size because they're kinda unique? I already did it with the pearl white. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA SunLu Black - Transmission Distance: 0.9 PLA Amazon Basics Brown - Transmission Distance: 5.8 PLA BambuLab Basic Red - Transmission Distance: 4.2 PLA Amazon Basics Orange - Transmission Distance: 3.9 PLA Overture Pro Yellow - Transmission Distance: 4.8 PLA Amazon Basics Light Green - Transmission Distance: 3 PLA Amazon Basics Pearlescent White - Transmission Distance: 9 PLA SunLu White - Transmission Distance: 6.6 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Brown At layer #11 (0.96mm) swap to Red At layer #12 (1.04mm) swap to Orange At layer #13 (1.12mm) swap to Yellow At layer #15 (1.28mm) swap to Light Green At layer #16 (1.36mm) swap to Pearlescent White At layer #21 (1.76mm) swap to White for the rest. Hope you enjoy!

(Edited)