Bola De Dragon Amanecer Hueforge

Copyright Claim

Bola De Dragon Amanecer Hueforge

Boost
35
67
9

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.08mm layer, 1 walls, 15% infill
0.08mm layer, 1 walls, 15% infill
Designer
2.4 h
1 plate
4.9(8)

Open in Bambu Studio
Boost
35
67
9
3
80
37
Released

Description

Bola de Dragon amanecer

 

Español

 

Imprimir al 100% de relleno con una altura de capa de 0,08 mm con una capa base de 0,16 mm

 

Filamentos usados:
PLA JAYO NEGRO Distancia de transmisión: 0.3
PLA PolyTerra ROJO Distancia de transmisión: 4.5
PLA Smartfil AMARILLO Distancia de transmisión: 6.8

PLA Geetech BLANCO Distancia de transmisión: 5

 

INSTRUCCIONES DE CAMBIO DE FILAMENTO:
Iniciar con Negro
En la capa #7 (0.64mm) cambiar a ROJO
En la capa #14 (1.20mm) cambiar a AMARILLO
En la capa #20 (1.68mm) cambiar a BLANCO hasta el final

English

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA PolyTerra Red Transmission Distance: 4.5
PLA Smartfil Yellow Transmission Distance: 6.8
PLA Geetech White Transmission Distance: 5

 

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #14 (1.20mm) swap to Yellow
At layer #20 (1.68mm) swap to White for the rest.

Comment & Rating (9)

Please fill in your opinion
(0/5000)

Print Profile
0.08mm layer, 1 walls, 15% infill
la couche de base est un peu fine mais l'ensemble rend super bien
0
Reply
Print Profile
0.08mm layer, 1 walls, 15% infill
Sehr cool 😎
0
Reply
Fantastic ¡¡¡
0
Reply
Print Profile
0.08mm layer, 1 walls, 15% infill
Came out great!
0
Reply
Print Profile
0.08mm layer, 1 walls, 15% infill
0
Reply
Boosted
Print Profile
0.08mm layer, 1 walls, 15% infill
0
Reply
Print Profile
0.08mm layer, 1 walls, 15% infill
0
Reply
Print Profile
0.08mm layer, 1 walls, 15% infill
0
Reply
Print Profile
0.08mm layer, 1 walls, 15% infill
0
Reply
No more