Ericsson

M8x20

cover

20220103_115915.webp

2025-01-09_c4mfkp0lourk.png

20220103_120034.webp

20220103_120050.webp

plate_1.png

2025-01-09_x37cu3u9l3ka.png

An der Rohrheizung fehlte noch ein weiterer Aufhänger. Der Haken ist leicht zu Drucken und erfüllt seinen zweck hervorragend. Sie benötigen aber noch eine M8 Schraube. In meinem Fall reicht eine M8x20 aus. Am besten ein wärme resistentes Filament Benutzen: PETG, ASA, ABS, Nylon 0,20 mm Schichtstärke min. 4 Wandlinien keine Stützstruktur&nbsp;Another hanger was missing from the pipe heater. The hook is easy to print and serves its purpose excellently. You will need an M8 screw though. In my case an M8x20 is sufficient. It is best to use a heat-resistant filament: PETG, ASA, ABS, nylon 0.20 mm layer thickness min. 4 wall lines no support structure

Another hanger was missing from the pipe heater. The hook is easy to print and fulfills its purpose excellently. However, you will also need an M8 screw. In my case, an M8x20 is sufficient. It is best to use a heat-resistant filament:PETG, ASA, ABS, nylon 0.20 mm layer height min. 4 wall lines no support structure&nbsp;Another hanger was missing from the pipe heater. The hook is easy to print and serves its purpose excellently. You will need an M8 screw though. In my case an M8x20 is sufficient. It is best to use a heat-resistant filament: PETG, ASA, ABS, nylon 0.20 mm layer thickness min. 4 wall lines no support structure

Print Profile(1)

Bill of Materials

Description

Comment & Rating (0)

License

Related Models

Pipe Heater Hook