Accessories boxes - Holder
Print Profile(2)
Bill of Materials
- Threaded Inserts M4 x 8:
Description
Accessories Boxes Holder!
I made a drawer holder for the accessory storage boxes, complemented with 3 PEI holders, and IPA bottle holder, and a smaller compartment!
You can download my accessory boxes model at the following link!
Accessories boxes by MZ - MakerWorld
The assembly is very simple:
Glue is required!
Step 1: Place the threaded inserts into the holes at the ends of the 4 beams using a soldering iron. (M4)
Step 2: Screw the beams to the right wall using M4 screws.
Step 3: Align the PEI holder with the right wall and screw it to the side wall through the pre-drilled holes.
Step 4: Insert the PEI sheet divider plates into the pre-formed grooves using adhesive.
Step 5: Print the TPU soles found in the "Bottom insert" printing profile and attach them to the recesses at the bottom of the holder!
Required materials: 8 db. Ruthex RX-M4x8.1 threaded inserts or similar M4 threaded inserts!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)