build instructions?

Translated to human.. Printing on the Ender3 MAX printer, printing area 300x300mm This is required for assembly: 4 pcs of wheels M4 threaded rod 4 pcs of bearings 6700zz (10x15x4) 24 pcs M3 x 20mm screws 10 pcs screw M3 x 30mm 34 pcs of M3 nuts 4 pcs of M4 nuts Aluminum U-profile 8x8mm, length 60cm 4 pcs wheels from the rc model

Assembly procedure: Two large parts are connected together, an aluminum U-profile is inserted inside the part. The connecting towbar is connected to the middle piece, the side fenders are installed on the sides. Axles: bearings are used and Hex joints with wheels are connected using a threaded rod. (The wheels used were from an Onroad car. You can use different wheels) Suspension: a fixed part is attached to the towbar on one side and a movable part on the other side and connected with a leaf spring.