Fan dust mesh filters (customizable)
Print Profile(3)
Description
Fan dust mesh filter of various size. Mesh line width is set to 0.35mm (default is 0.42mm) and lower print speed for finer mesh and better quality.
- You can change mesh fineness as well as pattern by altering infill density and infill pattern (default is rectilinear 24% density)
- Mesh size can also be changed by scaling the model only in X and Y direction. Alternatively, you can cut the mesh into desired sizes and shapes
Note: if you have trouble printing this model, please set line width of initial layer and sparse infill to 0.42mm.
In case you have bed adhesion issue, please turn off cooling for the first 2 layers and clean your build plate with soap and warm water.
Boost Me (for free)
Please consider Boost Me if you like my model. It helps me afford more filaments.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (112)