Card Faces: Jester

----------------------------

My designs for free download on Makerworld are intended for PERSONAL printing use only. If you wish to sell prints of my designs, please obtain a commercial license to compensate me for my time and skills in creating these files. A commercial license to sell my Makerworld AND exclusive designs on Patreon can be found at https://www.patreon.com/busykikibee

----------------------------

Setting up a game room or a card lounge and looking for some wall art? Check out these Card Faces! This is Jester. 

Some interesting information about cards gleaned from magicians:

• When men are asked to pick a card, they often will choose Ace of Spades, King of Spades, and King or Jack of Diamonds.
• When women are asked to pick a card, they choose Ace of Hearts, Queen of hearts and Queen of Diamonds. 
• When asked to pick a card from a fanned deck but “not be obvious” about it, people will choose a 7 of any suit. 
• In terms of most to least popular suits: Hearts → Spades → Diamonds → Clubs
• Everyone loves a Jester if you can play it. 

----------------------------

My designs are for personal printing use only. 

A commercial license to sell printed copies is available on my Patreon:

https://www.patreon.com/busykikibee

Patreon members also have access to exclusive designs available only on Patreon.

----------------------------

Pictured frame, stand or puzzle bottom can be found in Frames and Functional items over @CanadianGamer https://makerworld.com/@CanadianGamer/collections/1027330

Project: Jester 
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
 

This print uses 4 unique filaments
PLA BambuLab Basic Black 
PLA BambuLab Basic Red 
PLA BambuLab Matte Ash Gray
PLA BambuLab Matte Ivory White

Swap Instructions:
Start with Black
At 0.96mm swap to Red
At 1.52mm swap to Ash Gray
At 1.76mm swap to Ivory White for the rest.

All photos you see are of the actual print. Using the same filament choices will give the same result. 3mf file is AMS ready to slice and print with height range modifier and layers prepared for you. If using the STL to print the file, apply color swaps by their mm height and use height modifications and infill instructions as per the directions provided. You can safely ignore any error message about floating regions. You do NOT need a prime tower if you are printing with the STL file. Finally, if you wish to scale the design, do NOT scale the Z axis. Happy printing! 

Pictured frame, stand, or puzzle box are by @CanadianGamer and can be found in his Frames and Functional items here: https://makerworld.com/@CanadianGamer/collections/1027330