Tuning Fork Model
Print Profile(1)
Bill of Materials
Description
I originally wanted to try making a tuning fork experimental equipment that could be used, but the results of the experiment failed.
Due to the insufficient rigidity of PLA material, vibration attenuation is very fast, elastic modulus is low, and vibration mode is unstable, making it difficult to achieve the same effect as metal tuning forks.
Therefore, I have made slight adjustments to this model, which is only used as a visual model and does not have real functionality.
I reduced the filling rate (5% only) to minimize the usage of PLA. If you are interested in this, I can share my STL file and you are welcome to continue trying.
* During my testing, I set the filling rate of the tuning fork section to 85% and 2 layers of wall.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)