This is a 5 color print. Created using Hueforge and midjourney.

Instructions are for bambu slicer and prusa slicer.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm (used a base layer of 0.24 to provide some extra squish and hopefully reduce the corners lifting. I also threw mouse ears on check 3mf file)

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Elegoo red Transmission Distance: 7
PLA PolyLite Orange Transmission Distance: 7.5
PLA PolyLite Lemon Yellow Transmission Distance: 6.5
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Black until layer #11 at 1.04mm
red until layer #16 at 1.44mm
Orange until layer #26 at 2.24mm
Lemon Yellow until layer #34 at 2.88mm
White for the rest.

Play around with the colors if you like lmk what you think.