Pokémon Town - all parts snap together! by Kopp3D

Kopp3D

Miniatures>Architecture

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

Entire village - 0.24mm layer, 2 walls, 15% infill

Designer

12.2 h

7 plates

5.0(2)

Pokemon Center - 0.24mm layer, 2 walls, 15% infill

Designer

4.1 h

2 plates

5.0(2)

Pokestop - 0.12mm layer, 2 walls, 15% infill

Designer

18 min

1 plate

5.0(1)

PokeMart - 0.24mm layer, 2 walls, 15% infill

Designer

4.3 h

2 plates

Click to see more

Open in Bambu Studio

Boost

163

308

119

Released

Description

A Pokémon town to display your minifigures or train table! All models are made from scratch in Onshape using Pokémon 3rd generation games sprites for reference and tested on an X1C. Designed to print with minimal color changing waste. All items snap together, no glue or painting required! The buildings have a hole with an optional plug in the back for string lights. ONLY USE LED LIGHTS OR YOUR PRINT WILL MELT.

This is a project months in the making and includes the following models:

Pokémon Center
Pokémart (choose your region's sign: SHOP or MART)
Pokémon Gym that can be used with or without the roof slide-in. You can put an LED strip on the walls to make it look like stadium lights!
A general sign
A Pokéstop (not 3rd gen but it's a cute addition to your town if you want it!)

If you would like me to add a model to this village, feel free to ask in the comments. Can't promise anything, but if I make one, I'll upload it here and reply to your comment.

I also have winter holiday versions of these models you can find here: https://makerworld.com/en/models/72181#profileId-76343

Comment & Rating (13)

@vietfarmer21

what the square with the button for? i print it but is it on the back> it doesnt fit

The designer has replied

@Kopp3D

It is supposed to be a door plug for the hole in the back if you wanted it, just have to make sure it aligns to look like a door and push it in until it clicks. If you're printing the entire village, some of the plugs are different sizes. Hope this helps!

@vietfarmer21

Replying to @Kopp3D :

thank u for explainin.. i just printing the pc n it didn fit. i think it could be my printer. but thank for the help

@Kopp3D

You might need to use a deburring tool on the overhang of the circle, sometimes the supports don’t come off cleanly and the circle needs to be smoothed out.