Search models, users, collections, and posts
Itachi
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
9.3 h
1 plate
Open in Bambu Studio
Boost
60
114
4
0
70
27
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 117.97x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA+ Sunlu Red Transmission Distance: 6
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Red
At layer #20 (1.68mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (4)