Zip Tie Anchor
Copyright Claim
Zip Tie Anchor
Boost
41
95
15
Print Profile(2)
0.2mm layer, 6 walls, 25% infill
13 min
1 plate
0.2mm layer, 3 walls, 15% infill
15 min
1 plate
Open in Bambu Studio
Boost
41
95
15
0
122
139
Released
Description
This zip tie anchor is a redesign of PeterEllens' version (http://www.thingiverse.com/thing:24187) but I've made a little change so that it prints easily without supports. I've also included a small notch in the bottom to make it easy to pry off the built table. It is 1" square - simply apply a piece of 1" wide double-sided foam mounting tape to the back and you'll have a secure mounting point for small to medium sized zip ties. You can also scale it by 75% if you want to use 3/4" foam tape.
Print Settings
Printer:
UDIO
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30%
Category: PartsComment & Rating (15)
All
Print Profile
0.2mm layer, 6 walls, 25% infill
perfetti!
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Such a simple and useful print. They ran out of these at work so I decided to print some to hang up a dry erase board in my cubicle. Worked fantastic, thanks!
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
Perfect Print. TY
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
What a perfect design and printed very nicely. The small notch on bottom was perfect for detaching the parts from build plate with a screwdriver. Thanks!
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
awesome printed 8 of these to organize the cables in my son room he loves it and I’m glad I don’t have to see all the cables
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
Print Profile
0.2mm layer, 6 walls, 25% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld