Fantasy Football Trophy 2nd Place

My Print Settings:

For the Fisherman: .4 nozzle, 16mm layer height, 300mm/s for the first layer (no supports) 

For the Base: .4 nozzle, 20mm layer height, 300mm/s for first layer (no supports)

The trophy: .4 nozzle, 12mm layer height,  500mm/s for first layer (You will need  tree supports under the front of the ball) (Not included)

Poles: .4 nozzle, 20mm layer height, 300mm/s for first layer (You will need normal supports just under the hooks) (Not Included)

You will need to glue the pole to the fisherman and also glue the fisherman to the base.  Also you will need at least .63 inch eye screws to attach fishing line from pole to trophy. Maybe in the second version we will include hook in ball as well. What I did to achieve this was take a screw drive and make a little hole and then I screwed the eye screws in with no issue. 

I left space on the base and the trophy if you wanted to include text. I wrote the winners name on the trophy and the losers name on the base. 

Scorecard not included for obvious reasons. If you are interested in knowing how I achieved this please comment below and I will tell you.