Deckbox with Hinge 100+ single sleeved cards by Mattyds

Mattyds

Toys & Games>Other Toys & Games

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill

Designer

3 h

1 plate

4.8(30)

Open in Bambu Studio

Boost

204

258

Released

Description

A Hinged Deck Box that is capable of holding 100+ sleeved cards. Can be used to hold a Magic the Gathering EDH deck.

Internal Dimensions:

Width - 69mm

Depth - 69mm

Height - 96mm

The hinge is a tight fit but with a bit of force you will be able to click them together. This tight fit is needed to ensure it doesn't fall apart during use. The lid is also a bit of a tight fit but that is needed to pass the shake test.

Comment & Rating (37)

@ashley040508

Boosted

I love this design! The hinges are awesome and it prints soooo clean, barely any print lines. The original size didnt fit double sleeved decks very well so I sized up the box a little bit. Added screenshot below of the size. You can also see the comparison in the photos. The red box with the darker sleeves is single sleeved and the light sleeves are double.

@TiberiusTech

Print Profile

0.16mm layer, 2 walls, 15% infill

It’s been great! I’ve printed it in a few different colors, the first time I printed it the corners started warping up and since then I’ve made sure to do the glue stick on the area and they’ve printed without issue. Quality is great on them!

@Suitch

Print Profile

0.16mm layer, 2 walls, 15% infill

The model itself is fantastic! the parts mate really well and the interior is solid and clean. I like that both top and bottom have both male and female parts to ensure a secure lid. Edited: I think the angle of the model in the included profile makes it more likely to lose adhesion possibly. I am curious, why was it set at an angle instead of being squared with the bed?

(Edited)

@AllenTooTall

Print Profile

0.16mm layer, 2 walls, 15% infill

these are so cool!

(Edited)

@BDin3D

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Love this! Great print and it seems to have been selling like hotcakes at my local Pokémon tournament.

@faithinlaith

were you able to get the okay to do so, if so please let me know where to find the site to get that okay

@user_1498542628

Print Profile

0.16mm layer, 2 walls, 15% infill

Excellent box, and perfect snap together when printing on a p1s. Will be printing several more.

@user_889031700

Print Profile

0.16mm layer, 2 walls, 15% infill

ist gut

@epochtrends

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Best deck box out there, thank you!

@t.wiepen

Boosted

Max boost for you. I printed this box for all of my commander decks. Great!

@user_3714087701

Print Profile

0.16mm layer, 2 walls, 15% infill

Mechanism is super smooth :D gonna print more for sure :)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(1)

Description

Comment & Rating (37)

License

Related Models

hinge

Ball Joint

MTG Triskelion Commander Deck Box

Hinge