Pan (or anything) hook by Petru Simion

Petru Simion

Household>Other House Models

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.12mm layer, 5 walls, 15% infill

Designer

50 min

1 plate

5.0(3)

Open in Bambu Studio

Boost

Released

Description

A simple hook for a pan ( or anything else).

Uses 6mm screw (taperd holes in the model) or double sided tape( make sure to be a strong one and clean with some rubbing alcohol before).

Can be used with almost any pan and is capable to hold at least 3 kg (my heaviest pan) when printed with 5 walls ( see uploaded profile to print).

Less than an hour to print and takes only 15 grams of filament.

Comment & Rating (4)

@cerovskydavid

Print Profile

0.12mm layer, 5 walls, 15% infill

everything is fine... only one thing surprised me... I thought it would be smaller :)

(Edited)

The designer has replied

@petrusimion45

Turned out amazing, especially with that fillament, what brand is it? Also it's a preety beefy because i wanted to be sure that my pans won't break it, to have enough clearance for any type of handle an enough surface are on the bottom to use it with duoble sided tape. Worth to mention that my heaviest pan hangs around at 3 kilograms.

(Edited)