mrhiab

Came out nice using CookieCAD Dual Unicorn for the signature itself with the black box.  I like the design!

ledvinaphotography

Very nice! I made one for my daughter for Christmas. Solid Print. 

smoothbassman

0.16mm layer, 2 walls, 15% infill

Bri_Guy

Looks good, I hope they do. 
I fixed the upload as well.
Cheers!!

Thanks for putting this up but the back should be flipped 180 because it prints upside down with no supports. Thanks

Carey

Fixed the (i) and back plate + add cord slot in back plate 0.16mm layer, 2 walls, 15% infill

ATG007

mjharrop

I ended up cutting out the majority of the lightbox portion to make it a sign instead which worked out great. Thanks!

Rockfootball47

used the design with the hole in the back and had a blast making it! 

doom bandit

this is great! used the model with the back gap for an led cable and had to stick the two sides together but it worked out perfect for a gift for a little princess 

nsales75

cover

20231020_192131_11492904-7139-4b52-9cac-d23482d12393.jpg

20231020_192143_dc8bde14-bfb2-41e1-9432-43f65c6ddfaf.jpg

20231020_114625_d9e4cd09-ee80-455a-b196-769542c7173f.webp

plate_1.webp

plate_2.webp

Face Plate

plate_1.png

Back

plate_2.png

Bambu Studio Settings1. First Layer Flow Ratio: 1.04 2. Wall generator → Arachne. 3. Set Quality → Wall transitioning threshold angle to 50º. 4. In Strength → Advanced, adjust Infill/wall overlap to 20% to 25%. 5. Quality → Advanced → Activate "Avoid crossing walls." 6. Order the colors from the lightest to the darkest.7. First layer speeds, 30mms and 60mms for first layer infill

20240111_182502_eb2ee135-9918-4bfd-8ce4-0783410ebdce.webp

Tri-3D

Same as original creator, Just made the Dot on the i all white, and made the back plate lay flat Also added a cord slot in the back plate

vidguide

Adopted the other “i” repair, but removed the rear cable entrance, as I'd prefer to still a smaller hole to prevent light leakage.Also adapted the white layer to be thinner, 1mm blocks a lot of light, so isn't as bright as I'd like. Dropped the white to 0.6mm for a brighter result.

Thinner white for brighter result & repaired I - no hole in back-plate

Taylor Swift autograph light box for the Swifties in your life. Need to add a negative part for lights. Small part to balance it out if using it on shelf.

Print Profile(3)

Description

Comment & Rating (28)

License

Related Models

Taylor Swift Spotify THE TORTURED POETS DEPARTMENT

I'm a Swiftie Keychain

Eras Tour Bracelet Holder (Edinburgh Night 3)

Night Light Lithophane Box.

Taylor Swift Light Box