Door Handle Removable Bed Scraper - Bambu Logo

Remixed by

Door Handle Removable Bed Scraper - Bambu Logo

Remixed by
Boost
38
77
44

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

PLA - 0.2mm layer, 4 walls, 15% infill
PLA - 0.2mm layer, 4 walls, 15% infill
Designer
22 min
1 plate
4.9(39)

0.2mm layer, 2 walls, 50% infill, triangles
0.2mm layer, 2 walls, 50% infill, triangles
19 min
1 plate
4.7(3)

Open in Bambu Studio
Boost
38
77
44
4
244
243
Released

Description

If you like this model and it's not too much trouble, please hit the 👍 button - it helps out a lot 😀

 

This is a remix of the scraper included on Bambu Lab printers. The following changes have been made to it:

  • Able to hang on the X1C's door handle and securely stay in place
  • Bigger for easier use and more comfort
  • Bambu logo added to the scraper

Boost Me(for free)

Show your support by boosting this model. Any support is highly appreciated!

The print profile is for PLA in 2 colors with just 1 color swap! If you don't want the Bambu logo, it is a separate object so you can just delete it and print the scraper plain. Or you can add your own text/object and print it that way!

 

❗❗❗ Please Be Aware ❗❗❗

This scraper is considered a consumable, meaning it will degrade over time. I mainly use this for lifting/removing skirt lines, purge lines, remaining brims, calibration lines, etc.

 

If you are looking for a scraper to remove prints off of your build plate, this is probably not the ideal choice. Instead, flex your build plate to release the print or use the official razor blade scraper from Bambu Lab.

 

Comment & Rating (44)

Please fill in your opinion
(0/5000)

Print Profile
PLA - 0.2mm layer, 4 walls, 15% infill
fits perfectly on my P1S door. printed without problems. thank you very much! 😊 edit: after unstucking a few prints it looks like this..
(Edited)
The designer has replied
1
Reply
So this is considered a consumable as it will for sure degrade over time. Mine is a bit chewed up as well, though not nearly as much as yours. I mainly use mine for lifting up skirts, purge lines, calibration lines, etc. I don't really use it to lift up prints. For lifting up prints, I just flex the build plate to help release them. Thanks for providing the second photo as I will add this info to the description.
(Edited)
1
Reply
Replying to @TheMakerSphere :
Hi there Yes, with a bit of thinking I would have come to this conclusion (PLA=Not awfully strong when so thin) myself , I don't blame your model, it is still awesome. Since I'm a beginner with 3D Printing I restrained from flexing the build plate too much for releasing prints. I thought it may bulge the plate or damage it over time.. But when the pros do it as well, I'm not so shy anymore. If I'm brave I'll make a remix of your door-fitting scraper and the bambu lab one :) Thanks for your work!
(Edited)
1
Reply
Print Profile
PLA - 0.2mm layer, 4 walls, 15% infill
used model to test using PETG for the first time. printed out perfectly. fits snuggly on the door handle.
1
Reply
Print Profile
PLA - 0.2mm layer, 4 walls, 15% infill
Nice simple design and good print! but be warned these plastic scrapers just don't hold up. Better off getting plastic blades from AliExpress and printing a handle. but this is a great starter print. I decided to put my initials on the back of the handle as a little experiment for my first customized print, and it came out ok for a first attempt.
1
Reply
Print Profile
PLA - 0.2mm layer, 4 walls, 15% infill
tut was er soll. top
1
Reply
Print Profile
PLA - 0.2mm layer, 4 walls, 15% infill
this little guy works great! love how it attaches to the door handle.
(Edited)
1
Reply
Print Profile
PLA - 0.2mm layer, 4 walls, 15% infill
Quick and easy print. Did wear pretty quickly, but that's probably expected based on how thin the edge is.
1
Reply
Print Profile
PLA - 0.2mm layer, 4 walls, 15% infill
(Edited)
1
Reply
Print Profile
PLA - 0.2mm layer, 4 walls, 15% infill
prints realy well and does it's job. but the handle could be a bit longer
1
Reply
Print Profile
0.2mm layer, 2 walls, 50% infill, triangles
I liked this print tight to the door handle.
1
Reply
Print Profile
PLA - 0.2mm layer, 4 walls, 15% infill
invaluable little tool, my fingers thank you
1
Reply