Printed great. First non-preloaded print for me on my A1 mini. Had a little stringing at the top, but nothing that didn't melt off easily with a lighter.

Hi, Im trying to print this model from Creality CR-PLA filament, using Bambu A1 mini, but Im not successful. Im beginner, so excuse me if its something trivial ... I tried to print it 2 times, but it always failed on that hexagonal structure. First time i use default settings, second time i tried to lower the temperature (from 220C to 205C), and speed, but its even worse. Problem is, that when its printing that tiny pilars, that tiny layer ends always bit to the top, and when the head is doing next layer, it rip the whole pilar down. First time it starts on second row, second time, the whole print looks better,but it starts on the first hexagonal row ... See the pictures. Where can be a problem, is that filament not good for this model? Thanks

works fine, good job

Printed perfectly and now all my 3d poop is collected neatly in the bin! its a little thin but it should be fine.

Came out perfect! Thank you!

Nice model but I experimented some issues mostly printing the hexagons. I still don't know if its profile's problem or the calibration of my printer (A1 mini)

printed via bambu handy, the honeycomb is really thin, prob to thin for a safe print with these printing speeds.

structure is great but some of the holes at the rear and left of the print bed were not so good but I’m sure it will catch the poop! Thank you.

It works perfectly! Very good job, thank you!

came out pretty good. has some small imperfections but its still going to do its purpose. great job