Super Sunflower Fidget - Clicky Wheel/Button

A compact multi fidget toy - the Sunflower Fidget - with the special “Sunflower button”

Multiple fidgets in one compact size with the “Sunflower core” that brings it all together.

Magnet option and keyring hole - have one everywhere you go.

1. Rotating clicker wheel
2. Spinning rings
3. Clicky button
4. *Sunflower button
5. Spinner

The “Sunflower core” is a sliding push button.

Yes not only does the “Sunflower core” assembly house the clicky wheel, the spinning rings, and act like a normal spinner - but the entire “Sunflower core” assembly is a push button.

The Simple Sunflower has been released, check it out - https://makerworld.com/en/models/980587

• print in place
• thicker
• everything except the “Sunflower Button”

Prints in 2 pieces.

Tested Filaments: Bambu Basic PLA, E L E G O O Rapid PLA+, Sunlu PLA
Sorry, Makerworld wont let you put the word L E G O even as prt of other words anymore.

Let me know if there are any issues. As an example using Sunlu filament I found the clicky wheel makes more of a double click sound.

Let me know the filament you use and ill add to the list.

2 Piece

Base assembly - consists of the base, the sliding sunflower core, the spinning disk rings

Sunflower wheel - the outter sunflower ring

Simple Assembly:

1. The “Sunflower ring” snaps over the “Sunflower core” of the base.
   1. The spring will need to be pushed slighly to fit the ring in place
2. Loosen the “Sunflower core”
   1. Because of the overhangs the sunflower core tends to be slightly stuck.

   2. Simply use your finger to slide it down a first time to break any attachment points

               

Magnetic

There is a pause configured in the magnetic print profile so you can insert a 6x3 N52 magnet into the center spinning disk.

Keychain

There is a hole in the bottom for a keyring. Keep one with you everywhere you go.

Printing Info

• Prints with supports and support blockers. 
  • Support blockers ensure all moving pieces should work.
• Prints in 2 pieces or 3 pieces.
• Print pieces seperately for multicolour without AMS
• Printed in PLA

Default Print Settings

• 0.2mm layer height
• 15% gyroid infill
• 2 walls
• speed slowed for overhangs and bridges
• arachne

Check out my other collections:

• Christmas Ornaments - https://makerworld.com/en/collections/16207606
• SFModular Swappable Coaster Sets - https://makerworld.com/en/collections/3828298-sfmodular-coaster-sets
• SimplePin Lapel Pins - https://makerworld.com/en/collections/4330701-fritz3d-simplepin-lapel-pins
• Dummy 13 Models - https://makerworld.com/en/collections/5010156-fritz3d-dummy-13
• Valentines Day Collection - https://makerworld.com/en/collections/4469171-fritz3d-valentines
• SimpleTag Name Tag System - https://makerworld.com/en/collections/3733512-fritz3d-simpletag-name-tags
• Keychains Collection - https://makerworld.com/en/collections/4469136-fritz3d-keychains