Search models, users, collections, and posts
Flexi Minifig Friend
IP Report
Print Profile(2)
0.2mm layer, 3 walls, 10% infill
Designer
40 min
1 plate
A1 Mini 2 color (0.2mm layer, 2 walls, 12% infill)
51 min
1 plate
Open in Bambu Studio
Boost
673
1509
150
65
1.6 k
1.1 k
Released
Description
A little brick-inspired mascot to keep you company.
Printing tips:
- No supports needed.
- Top surface pattern = Concentric.
- Reduce outer wall and top surface speeds for more consistent surface finish from top to bottom of the model.
- Low infill percentage (5-10%) is fine but can be increased to add mass to the body if desired.
- The head can be printed separately (see “Separate Body & Head” .stl file) allowing it to rotate.
- If the model detaches from the bed during printing, try in this order:
- Washing build surface with soap and water (if using textured PEI)
- Reducing inner wall and infill speeds as in the provided print profile
- Increasing bed temp by 5-10 deg
- Adding an outer brim of 5-10mm (a last resort that will necessitate tedious post processing of the legs)
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (150)